New way of doing some things I guess.HEADmaster

 Changes to be committed:
        modified:   Vencord/settings/settings.json
        modified:   X11/xinit
        modified:   appimageupdate
        deleted:    backlight
        modified:   btop/btop.conf
        modified:   clockpower
        modified:   htop/htoprc
        modified:   keybinds
        modified:   lock
        modified:   nvim/init.vim
        deleted:    qBittorrent/ICEBERG.qbtheme
        deleted:    qBittorrent/ayuDark.qbtheme
        deleted:    vpn
        modified:   xrec
        modified:   zsh/aliases
        modified:   zsh/env
        modified:   zsh/zshrc

17 files changed, 455 insertions, 168 deletions

diff --git a/Vencord/settings/settings.json b/Vencord/settings/settings.json
index 70ac441..6c08a4e 100644
--- a/Vencord/settings/settings.json
+++ b/Vencord/settings/settings.json
@@ -142,7 +142,10 @@
             "transformEmojis": true,
             "transformCompoundSentence": true,
             "emojiSize": 48,
-            "stickerSize": 160
+            "stickerSize": 160,
+            "useHyperLinks": true,
+            "hyperLinkText": "{{NAME}}",
+            "disableEmbedPermissionCheck": true
         },
         "FakeProfileThemes": {
             "enabled": true,
@@ -165,7 +168,8 @@
         },
         "GameActivityToggle": {
             "enabled": true,
-            "oldIcon": false
+            "oldIcon": false,
+            "location": "PANEL"
         },
         "GifPaste": {
             "enabled": true
@@ -197,16 +201,6 @@
         "KeepCurrentChannel": {
             "enabled": true
         },
-        "LastFMRichPresence": {
-            "enabled": true,
-            "shareUsername": false,
-            "hideWithSpotify": true,
-            "statusName": "some music",
-            "useListeningStatus": false,
-            "missingArt": "lastfmLogo",
-            "nameFormat": "status-name",
-            "hideWithActivity": false
-        },
         "LoadingQuotes": {
             "enabled": true,
             "replaceEvents": true,
@@ -218,7 +212,8 @@
         "MemberCount": {
             "enabled": true,
             "memberList": true,
-            "toolTip": true
+            "toolTip": true,
+            "voiceActivity": true
         },
         "MessageClickActions": {
             "enabled": false,
@@ -242,11 +237,6 @@
             "logDeletes": true,
             "collapseDeleted": false
         },
-        "MessageTags": {
-            "enabled": true,
-            "clyde": true,
-            "tagsList": {}
-        },
         "MoreCommands": {
             "enabled": true
         },
@@ -455,7 +445,8 @@
             "enabled": true,
             "displayNames": false,
             "mode": "user-nick",
-            "inReplies": false
+            "inReplies": false,
+            "friendNicknames": "dms"
         },
         "SilentMessageToggle": {
             "enabled": true
@@ -506,7 +497,8 @@
         "TypingIndicator": {
             "enabled": true,
             "includeMutedChannels": false,
-            "includeCurrentChannel": true
+            "includeCurrentChannel": true,
+            "indicatorMode": 3
         },
         "TypingTweaks": {
             "enabled": true,
@@ -636,7 +628,8 @@
             "color": "313338"
         },
         "FixImagesQuality": {
-            "enabled": true
+            "enabled": true,
+            "originalImagesInChat": false
         },
         "Decor": {
             "enabled": true
@@ -725,10 +718,14 @@
             "enabled": false
         },
         "ImageLink": {
-            "enabled": false
+            "enabled": true
         },
         "MessageLatency": {
-            "enabled": false
+            "enabled": true,
+            "latency": 2,
+            "detectDiscordKotlin": true,
+            "showMillis": false,
+            "ignoreSelf": false
         },
         "NoServerEmojis": {
             "enabled": false
@@ -746,7 +743,7 @@
             "enabled": false
         },
         "VoiceDownload": {
-            "enabled": false
+            "enabled": true
         },
         "PartyMode": {
             "enabled": false,
@@ -765,7 +762,8 @@
             "enabled": false
         },
         "CopyEmojiMarkdown": {
-            "enabled": false
+            "enabled": false,
+            "copyUnicode": true
         },
         "CustomIdle": {
             "enabled": false
@@ -797,7 +795,8 @@
             "enabled": true
         },
         "AccountPanelServerProfile": {
-            "enabled": false
+            "enabled": false,
+            "prioritizeServerProfile": false
         },
         "AlwaysExpandRoles": {
             "enabled": false
@@ -815,7 +814,8 @@
             "enabled": false
         },
         "MentionAvatars": {
-            "enabled": false
+            "enabled": true,
+            "showAtSymbol": true
         },
         "NoMaskedUrlPaste": {
             "enabled": false
@@ -827,16 +827,49 @@
             "enabled": false
         },
         "Summaries": {
-            "enabled": false
+            "enabled": true
         },
         "StickerPaste": {
             "enabled": false
         },
         "YoutubeAdblock": {
-            "enabled": false
+            "enabled": true
         },
         "ExpressionCloner": {
             "enabled": true
+        },
+        "CustomCommands": {
+            "enabled": true,
+            "clyde": true,
+            "tagsList": {}
+        },
+        "AutoDNDWhilePlaying": {
+            "enabled": false
+        },
+        "CharacterCounter": {
+            "enabled": true
+        },
+        "CopyStickerLinks": {
+            "enabled": false
+        },
+        "ImageFilename": {
+            "enabled": false
+        },
+        "MoreQuickReactions": {
+            "enabled": false
+        },
+        "ConcatenatedComponentExtractor": {
+            "enabled": true
+        },
+        "MusicRichPresence": {
+            "enabled": true,
+            "shareUsername": false,
+            "hideWithSpotify": true,
+            "statusName": "some music",
+            "useListeningStatus": false,
+            "missingArt": "lastfmLogo",
+            "nameFormat": "status-name",
+            "hideWithActivity": false
         }
     },
     "notifications": {
@@ -849,7 +882,12 @@
         "authenticated": false,
         "url": "https://api.vencord.dev/",
         "settingsSync": false,
-        "settingsSyncVersion": 1749040617789
+        "settingsSyncVersion": 1784375509010
+    },
+    "eagerPatches": false,
+    "uiElements": {
+        "chatBarButtons": {},
+        "messagePopoverButtons": {}
     },
-    "eagerPatches": false
+    "windowsMaterial": "none"
 }
\ No newline at end of file
diff --git a/X11/xinit b/X11/xinit
index 6c87ddc..adbbbfd 100755
--- a/X11/xinit
+++ b/X11/xinit
@@ -13,8 +13,8 @@ xrandr -s 1920x1080 -r 144 &        # target screen resolution
 xset r rate 300 30 &                # key repeat delay and speed
 xset b off                          # disable bell
 
-xrdb merge ~/.Xresources            # asset resources
-picom --backend glx &               # compositor
+xrdb merge ~/.Xresources                                # asset resources
+picom --no-vsync --backend glx --unredir-if-possible &  # compositor
 
 #                  #
 # ## more stuff ## #
diff --git a/appimageupdate b/appimageupdate
index 84f87dc..ca5d648 100755
--- a/appimageupdate
+++ b/appimageupdate
@@ -3,6 +3,6 @@
 set -e
 
 /home/alphara/.applications/AppImageUpdate-x86_64.AppImage $@ # GUI
-#/home/alphara/.applications/appimageupdatetool-x86_64.AppImage $@ # CLI
+/home/alphara/.applications/appimageupdatetool-x86_64.AppImage $@ # CLI
 
 rm ./*.zs-old
diff --git a/backlight b/backlight
deleted file mode 100755
index 8eaf6e4..0000000
--- a/backlight
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-set -e
-
-sudo echo $1 > /sys/class/backlight/amdgpu_bl0/brightness
diff --git a/btop/btop.conf b/btop/btop.conf
index 33779c2..f39326b 100644
--- a/btop/btop.conf
+++ b/btop/btop.conf
@@ -1,18 +1,23 @@
-#? Config file for btop v. 1.4.4
+#? Config file for btop v.1.4.7
 
 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
 color_theme = "TTY"
 
 #* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = False
+theme_background = false
 
 #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = True
+truecolor = true
 
 #* Set to true to force tty mode regardless if a real tty has been detected or not.
 #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = False
+force_tty = false
+
+#* Option to disable presets. Either the default preset, custom presets, or all presets.
+#* "Off" All presets are enabled.
+#* "Default" preset is disabled.#* "Custom" presets are disabled.#* "All" presets are disabled.
+disable_presets = "Off"
 
 #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
 #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
@@ -22,10 +27,16 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul
 
 #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
 #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = False
+vim_keys = false
+
+#* Disable all mouse events.
+disable_mouse = false
 
 #* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = True
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = false
 
 #* Default symbols to use for graph creation, "braille", "block" or "tty".
 #* "braille" offers the highest resolution but might not be included in all fonts.
@@ -50,47 +61,53 @@ graph_symbol_net = "default"
 graph_symbol_proc = "default"
 
 #* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
-shown_boxes = "net proc mem cpu gpu0"
+shown_boxes = "proc cpu mem net gpu0"
 
 #* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
 update_ms = 100
 
 #* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
 #* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
-proc_sorting = "memory"
+proc_sorting = "cpu lazy"
 
 #* Reverse sorting order, True or False.
-proc_reversed = False
+proc_reversed = false
 
 #* Show processes as a tree.
-proc_tree = False
+proc_tree = false
 
 #* Use the cpu graph colors in the process list.
-proc_colors = True
+proc_colors = true
 
 #* Use a darkening gradient in the process list.
-proc_gradient = True
+proc_gradient = true
 
 #* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = False
+proc_per_core = false
 
 #* Show process memory as bytes instead of percent.
-proc_mem_bytes = True
+proc_mem_bytes = true
 
 #* Show cpu graph for each process.
-proc_cpu_graphs = True
+proc_cpu_graphs = true
 
 #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = False
+proc_info_smaps = false
 
 #* Show proc box on left side of screen instead of right.
-proc_left = False
+proc_left = false
 
 #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = False
+proc_filter_kernel = false
+
+#* Should the process list follow the selected process when detailed view is open.
+proc_follow_detailed = true
 
 #* In tree-view, always accumulate child process resources in the parent process.
-proc_aggregate = False
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
 
 #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
@@ -101,28 +118,31 @@ cpu_graph_upper = "total"
 cpu_graph_lower = "total"
 
 #* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
-show_gpu_info = "Auto"
+show_gpu_info = "On"
 
 #* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = True
+cpu_invert_lower = true
 
 #* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = False
+cpu_single_graph = false
 
 #* Show cpu box at bottom of screen instead of top.
-cpu_bottom = False
+cpu_bottom = false
 
 #* Shows the system uptime in the CPU box.
-show_uptime = True
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
 
 #* Show cpu temperature.
-check_temp = True
+check_temp = true
 
 #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
 cpu_sensor = "Auto"
 
 #* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = True
+show_coretemp = true
 
 #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
 #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
@@ -134,17 +154,20 @@ cpu_core_map = ""
 temp_scale = "celsius"
 
 #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = False
+base_10_sizes = false
 
 #* Show CPU frequency.
-show_cpu_freq = True
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "range"
 
 #* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
 #* Special formatting: /host = hostname | /user = username | /uptime = system uptime
 clock_format = "%X"
 
 #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = True
+background_update = true
 
 #* Custom cpu model name, empty string to disable.
 custom_cpu_name = ""
@@ -154,58 +177,61 @@ custom_cpu_name = ""
 disks_filter = ""
 
 #* Show graphs instead of meters for memory values.
-mem_graphs = True
+mem_graphs = true
 
 #* Show mem box below net box instead of above.
-mem_below_net = False
+mem_below_net = false
 
 #* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = True
+zfs_arc_cached = true
 
 #* If swap memory should be shown in memory box.
-show_swap = True
+show_swap = true
 
 #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = True
+swap_disk = true
 
 #* If mem box should be split to also show disks info.
-show_disks = True
+show_disks = true
 
 #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = True
+only_physical = true
 
 #* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = True
+use_fstab = true
 
 #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
-zfs_hide_datasets = False
+zfs_hide_datasets = false
 
 #* Set to true to show available disk space for privileged users.
-disk_free_priv = False
+disk_free_priv = false
 
 #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = True
+show_io_stat = true
 
 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = False
+io_mode = true
 
 #* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = False
+io_graph_combined = false
 
 #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
 #* Example: "/mnt/media:100 /:20 /boot:1".
 io_graph_speeds = ""
 
+#* Swap the positions of the upload and download speed graphs. When true, upload will be on top.
+swap_upload_download = false
+
 #* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
 net_download = 100
 
 net_upload = 100
 
 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = True
+net_auto = true
 
 #* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = False
+net_sync = false
 
 #* Starts with the Network Interface specified here.
 net_iface = ""
@@ -214,26 +240,32 @@ net_iface = ""
 base_10_bitrate = "Auto"
 
 #* Show battery stats in top right if battery is present.
-show_battery = True
+show_battery = true
 
 #* Which battery to use if multiple are present. "Auto" for auto detection.
 selected_battery = "Auto"
 
 #* Show power stats of battery next to charge indicator.
-show_battery_watts = True
+show_battery_watts = true
 
-#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
 #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
 log_level = "WARNING"
 
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
 #* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
-nvml_measure_pcie_speeds = True
+nvml_measure_pcie_speeds = true
 
 #* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
-rsmi_measure_pcie_speeds = True
+rsmi_measure_pcie_speeds = true
 
 #* Horizontally mirror the GPU graph.
-gpu_mirror_graph = True
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel apple"
+shown_gpus = "nvidia amd intel"
 
 #* Custom gpu0 model name, empty string to disable.
 custom_gpu_name0 = ""
diff --git a/clockpower b/clockpower
index efcc1da..7fa6473 100755
--- a/clockpower
+++ b/clockpower
@@ -1,27 +1,102 @@
 #!/bin/bash
 
+#case $1 in
+
+    #min)
+        #sudo cpupower frequency-set --governor powersave
+        #sudo cpupower frequency-set --related --governor powersave
+        #sudo cpupower idle-set --enable-all
+        #;;
+
+    #max)
+        #sudo cpupower frequency-set --governor performance
+        #sudo cpupower frequency-set --related --governor performance
+
+        #sudo cpupower frequency-set --freq 3.20GHz # don t do this, comment away
+        #sudo cpupower frequency-set --min 4.30GHz
+
+        #sudo cpupower idle-set --disable 3
+        #sudo cpupower idle-set --disable 2
+        #sudo cpupower idle-set --disable 1
+        #sudo cpupower idle-set --disable 0
+        #;;
+
+#esac
+
+#sudo cpupower frequency-info
+#sudo cpupower monitor
+
+# 1.1 4.3
+
+#!/bin/bash
+
+# Helper function to set EPP (Energy Performance Preference)
+set_epp() {
+    for file in /sys/devices/system/cpu/cpu*/cpufreq/energy_performance_preference; do
+        [ -f "$file" ] && echo "$1" | sudo tee "$file" > /dev/null
+    done
+}
+
 case $1 in
 
-    min)
-        sudo cpupower frequency-set --governor powersave
-        sudo cpupower frequency-set --related --governor powersave
+    max)
+        echo "Applying MAX Performance (osu!lazer Mode)..."
+        # 1. Enable Sleep States
+        # Allows unused cores to sleep so the game cores get all the power/speed.
+        sudo cpupower idle-set --enable-all
+
+        # 2. Set Governor to Performance
+        sudo cpupower frequency-set --governor performance --related
+
+        # 3. Set Hardware Hint to 'performance'
+        set_epp performance
+
+        # 4. Reset Frequency Limits
+        # We set min to your hardware lowest (403MHz) to allow full range boosting.
+        sudo cpupower frequency-set --min 403MHz
+        sudo cpupower frequency-set --max 4.47GHz
+        ;;
+
+    default)
+        echo "Applying DEFAULT Settings (Balanced)..."
         sudo cpupower idle-set --enable-all
+
+        # 'powersave' is the standard governor for amd-pstate (it scales dynamically)
+        sudo cpupower frequency-set --governor powersave --related
+
+        # 'balance_performance' is the default hardware hint
+        set_epp balance_performance
+
+        # Reset limits
+        sudo cpupower frequency-set --min 403MHz
+        sudo cpupower frequency-set --max 4.47GHz
         ;;
 
-    max)
-        sudo cpupower frequency-set --governor performance
-        sudo cpupower frequency-set --related --governor performance
+    min)
+        echo "Applying MIN Power (Battery Saver)..."
+        sudo cpupower idle-set --enable-all
+        sudo cpupower frequency-set --governor powersave --related
 
-        sudo cpupower frequency-set --freq 3.20GHz
-        sudo cpupower frequency-set --min 3.20GHz
+        # Tell hardware to save as much power as possible
+        set_epp power
 
-        sudo cpupower idle-set --disable 3
-        sudo cpupower idle-set --disable 2
-        sudo cpupower idle-set --disable 1
-        sudo cpupower idle-set --disable 0
+        # Cap frequency to 2.0GHz to save battery
+        sudo cpupower frequency-set --min 403MHz
+        sudo cpupower frequency-set --max 2.0GHz
+        ;;
+
+    *)
+        echo "Usage: $0 {max|default|min}"
+        exit 1
         ;;
 
 esac
 
-sudo cpupower frequency-info
+echo "------------------------------------------------"
+echo "Current Configuration:"
+sudo cpupower frequency-info | grep "current policy"
+echo "------------------------------------------------"
+echo "Monitoring (Press Ctrl+C to stop)..."
 sudo cpupower monitor
+
+cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
diff --git a/htop/htoprc b/htop/htoprc
index 5a09d38..12fa164 100644
--- a/htop/htoprc
+++ b/htop/htoprc
@@ -1,6 +1,6 @@
 # Beware! This file is rewritten by htop when settings are changed in the interface.
 # The parser is also very primitive, and not human-friendly.
-htop_version=3.4.1-3.4.1
+htop_version=3.5.1-3.5.1
 config_reader_min_version=3
 fields=0 48 17 18 38 39 40 2 46 47 49 1
 hide_kernel_threads=1
@@ -23,6 +23,7 @@ header_margin=1
 screen_tabs=0
 detailed_cpu_time=1
 cpu_count_from_one=1
+show_cpu_smt_labels=0
 show_cpu_usage=1
 show_cpu_frequency=1
 show_cpu_temperature=1
@@ -40,14 +41,14 @@ column_meter_modes_0=1 2 1 2 2 2
 column_meters_1=RightCPUs2 Blank Tasks Battery LoadAverage Uptime
 column_meter_modes_1=1 2 2 2 2 2
 tree_view=0
-sort_key=47
+sort_key=46
 tree_sort_key=46
 sort_direction=-1
 tree_sort_direction=-1
 tree_view_always_by_pid=0
 all_branches_collapsed=0
 screen:Main=PID USER PRIORITY NICE M_VIRT M_RESIDENT M_SHARE STATE PERCENT_CPU PERCENT_MEM TIME Command
-.sort_key=PERCENT_MEM
+.sort_key=PERCENT_CPU
 .tree_sort_key=PERCENT_CPU
 .tree_view_always_by_pid=0
 .tree_view=0
diff --git a/keybinds b/keybinds
index 825f559..4893de9 100644
--- a/keybinds
+++ b/keybinds
@@ -11,12 +11,12 @@ alt + shift + t
 alt + c
     color-picker
 
-# Screen Shots
+# Screen Shot Keybinds
 
-alt + control + Print
+alt + control + f
     xshot full
 
-alt + Print
+alt + F12
     clip full
 
 alt + control + s
@@ -50,12 +50,12 @@ alt + f
 alt + shift + f
     brave
 
-# Chromium (dev testing)
+# Chromium (dev testing) (not that used)
 
 alt + shift + c
     chromium
 
-# LibreWolf
+# LibreWolf (not that used)
 
 alt + w
     librewolf
@@ -63,9 +63,9 @@ alt + w
 # Discord
 
 alt + d
-    vesktop # discord
+    vesktop # vencord / discord is sometimes working better
 
-# Dino
+# Dino (not that used)
 
 alt + shift + d
     dino
@@ -80,16 +80,15 @@ alt + e
 # brightness control
 
 XF86MonBrightnessDown
-    notify-send --replace-id=1 "🌑 Brightness Down" && sudo backlight 0 # Moon Emoji
+    sudo xbacklight -dec 10 && notify-send --replace-id=1 "🌑 Brightness $(sudo xbacklight -get | cut -d '.' -f 1)%"
 
 XF86MonBrightnessUp
-    notify-send --replace-id=1 "🌞 Brightness Up" && sudo backlight 255 # Sun Emoji
+    sudo xbacklight -inc 10 && notify-send --replace-id=1 "🌞 Brightness $(sudo xbacklight -get | cut -d '.' -f 1)%"
 
-# fan control
+# fan control and performance
 
 alt + XF86AudioRaiseVolume
     notify-send --replace-id=4 "🌬️ Fan Speed Up" && sudo nbfc-set 100
-
 alt + XF86AudioLowerVolume
     notify-send --replace-id=4 "🌬️ Fan Speed Down" && sudo nbfc-kill
 
diff --git a/lock b/lock
index f0bce84..f540729 100755
--- a/lock
+++ b/lock
@@ -23,7 +23,7 @@ lock_screen() {
 
     xsecurelock
 
-    picom --backend glx &
+    picom --no-vsync --backend glx --unredir-if-possible &
 }
 
 # Settings
diff --git a/nvim/init.vim b/nvim/init.vim
index 69bc148..433dd2d 100644
--- a/nvim/init.vim
+++ b/nvim/init.vim
@@ -51,9 +51,11 @@ autocmd FileType * setlocal formatoptions-=c formatoptions-=r formatoptions-=o
 call plug#begin('~/.vim/plugged')
 
     " Appearance and UI
-    Plug 'vim-airline/vim-airline'
-    Plug 'vim-airline/vim-airline-themes'
-    Plug 'ryanoasis/vim-devicons'
+    Plug 'nvim-lualine/lualine.nvim'
+    "Plug 'vim-airline/vim-airline' " DEPRECATED: IN NEW VERSION, SWITCHED TO LUALINE
+    "Plug 'vim-airline/vim-airline-themes'
+    "Plug 'ryanoasis/vim-devicons'
+    Plug 'nvim-tree/nvim-web-devicons'
 
     " Text manipulation
     Plug 'tpope/vim-surround'
@@ -94,10 +96,15 @@ call plug#begin('~/.vim/plugged')
     Plug 'hrsh7th/cmp-buffer'
     Plug 'hrsh7th/cmp-path'
     Plug 'hrsh7th/cmp-cmdline'
+    Plug 'saadparwaiz1/cmp_luasnip'
+
+    " Snippets
     Plug 'L3MON4D3/LuaSnip'
+    Plug 'rafamadriz/friendly-snippets'
 
     " null-ls (for linters and formatters)
-    Plug 'jose-elias-alvarez/null-ls.nvim'
+    "Plug 'jose-elias-alvarez/null-ls.nvim' " DEPRECATED: after neovim 0.10
+    Plug 'nvimtools/none-ls.nvim' " fork that supports neovim 0.11
 
     " Diagnostics UI (optional UI for LSP diagnostics)
     Plug 'j-hui/fidget.nvim'
@@ -146,6 +153,14 @@ let g:vimtex_view_general_viewer = 'okular'
 let g:vimtex_view_general_options = '--unique file:@pdf\#src:@line@tex'
 let maplocalleader = ","
 
+" Do not automatically open the quickfix window, if you want to open it, use ,le
+let g:vimtex_quickfix_mode = 0
+
+augroup vimtex_auto_compile
+    autocmd!
+    autocmd BufWritePost *.tex call vimtex#compiler#compile()
+augroup END
+
 " =============================================================================
 " Discord Presence
 " =============================================================================
@@ -157,12 +172,14 @@ let g:presence_main_image="file"
 " Airline Configurations
 " =============================================================================
 
-let g:airline_powerline_fonts = 1
-let g:airline#extensions#tabline#enabled = 1
-let g:airline_theme='deus'
+" DEPRECATED: I used to use airline, but I switched to lualine for better performance and more customization options. I keep these settings here in case I want to switch back or if I want to use some of the themes or extensions that airline offers.
+
+"let g:airline_powerline_fonts = 1
+"let g:airline#extensions#tabline#enabled = 1
+"let g:airline_theme='deus'
 
 " for vimtex
-let g:airline#extensions#vimtex#enabled = 1
+"let g:airline#extensions#vimtex#enabled = 1
 
 " Enable filetype plugins and indentation
 filetype plugin indent on
@@ -180,6 +197,11 @@ set termguicolors
 " Setup nvim-colorizer
 lua require'colorizer'.setup()
 
+" Lualine transparent background
+highlight StatusLine guibg=NONE ctermbg=NONE
+highlight StatusLineNC guibg=NONE ctermbg=NONE
+highlight TabLineFill guibg=NONE ctermbg=NONE
+
 " =============================================================================
 " Cursor highlight line
 " =============================================================================
@@ -214,36 +236,28 @@ autocmd BufEnter * if tabpagenr('$') == 1 && winnr('$') == 1 && exists('b:NERDTr
 " Spell check toggle
 map S :setlocal spell! spelllang=en_us<CR>
 
-" Movement
-map J k
-map K j
-
 " Quick save and exit
 map zz :wq<CR>
 map zx :q!<CR>
 map zs :w<CR>
 
-" Ergonomic save and exit
-map <leader>w :wq<CR>
-map <leader>q :q!<CR>
-map <leader>s :w<CR>
-
 " =============================================================================
 " Copilot Setup
 " =============================================================================
 
-" Disable copilot for text and markdown files
+" Disable copilot for text, markdown and latex files
 autocmd FileType text let g:copilot_enabled = 0
 autocmd FileType markdown let g:copilot_enabled = 0
+autocmd FileType tex let g:copilot_enabled = 0
 
 " =============================================================================
 " NeoVide Setup
 " =============================================================================
 
 if exists("g:neovide")
-    set guifont="Inconsolata"
-    let g:neovide_transparency = 0.75
-    let g:airline_powerline_fonts = 0
+    set guifont=Inconsolata:h8
+    let g:neovide_opacity = 1
+    let g:neovide_normal_opacity = 0.70
     let g:neovide_cursor_vfx_mode = "pixiedust"
 endif
 
@@ -252,6 +266,47 @@ endif
 " =============================================================================
 
 lua << EOF
+
+local custom_onedark = require('lualine.themes.onedark')
+
+for _, mode in pairs(custom_onedark) do
+  if mode.c then
+    mode.c.bg = 'NONE'
+  end
+end
+
+require('lualine').setup {
+  options = {
+    theme = custom_onedark,
+
+    icons_enabled = true,
+    component_separators = { left = '', right = ''},
+    section_separators = { left = '', right = ''},
+    globalstatus = true,
+  },
+
+  tabline = {
+    lualine_a = {'buffers'},
+    lualine_b = {},
+    lualine_c = {},
+    lualine_x = {},
+    lualine_y = {},
+    lualine_z = {'tabs'}
+  },
+
+  sections = {
+    lualine_c = {
+      'filename',
+      function()
+        if vim.bo.filetype == 'tex' and vim.fn.exists('*vimtex#statusline') == 1 then
+          return vim.fn['vimtex#statusline']()
+        end
+        return ''
+      end
+    }
+  }
+}
+
 -- Keymap utility functions
 local function buf_set_keymap(...) vim.api.nvim_buf_set_keymap(0, ...) end
 
@@ -401,7 +456,14 @@ for server, config in pairs(servers) do
     capabilities = capabilities,
   }, config or {})
 
-  require("lspconfig")[server].setup(config)
+  -- Verify if we're on Neovim 0.11+ (which has native vim.lsp.config)
+  if vim.lsp.config then
+    vim.lsp.config(server, config)
+    vim.lsp.enable(server)
+  else
+    -- Fallback for Neovim 0.10
+    require("lspconfig")[server].setup(config)
+  end
 end
 
 -- null-ls (for formatters/linters not provided by LSP)
@@ -420,15 +482,18 @@ null_ls.setup({
       end,
     }),
     null_ls.builtins.formatting.isort,
-    null_ls.builtins.diagnostics.flake8,
+    -- null_ls.builtins.diagnostics.flake8,
     null_ls.builtins.formatting.gofmt,
     null_ls.builtins.formatting.goimports,
-    null_ls.builtins.formatting.rustfmt,
+    -- null_ls.builtins.formatting.rustfmt,
   },
 })
 
 -- cmp setup
 local cmp = require 'cmp'
+
+require("luasnip.loaders.from_vscode").lazy_load()
+
 cmp.setup({
   snippet = {
     expand = function(args)
@@ -458,4 +523,47 @@ require("fidget").setup({
         }
     }
 })
+
+local ls = require("luasnip")
+local s = ls.snippet
+local t = ls.text_node
+local i = ls.insert_node
+local fmt = require("luasnip.extras.fmt").fmt
+
+ls.add_snippets("tex", {
+  -- 1. Mediu matematic inline rapid
+  -- Scrii "mk" -> devine "$ cursor $"
+  s("mk", {
+    t("$"), i(1), t("$"), i(0)
+  }),
+
+  -- 2. Fracții
+  -- Scrii "ff" -> devine "\frac{ cursor }{ }"
+  s("ff", {
+    t("\\frac{"), i(1), t("}{"), i(2), t("}"), i(0)
+  }),
+
+  -- 3. Ecuație numerotată
+  -- Scrii "eq" -> mediu equation
+  s("eq", {
+    t({"\\begin{equation}", "\t"}),
+    i(1),
+    t({"", "\\end{equation}"}), i(0)
+  }),
+
+  -- 4. Ecuație nenumerotată (align*)
+  -- Scrii "al" -> mediu align*
+  s("al", {
+    t({"\\begin{align*}", "\t"}),
+    i(1),
+    t({"", "\\end{align*}"}), i(0)
+  }),
+
+  -- 5. Bold text
+  -- Scrii "bf" -> \textbf{}
+  s("bf", {
+    t("\\textbf{"), i(1), t("}"), i(0)
+  }),
+})
+
 EOF
diff --git a/qBittorrent/ICEBERG.qbtheme b/qBittorrent/ICEBERG.qbtheme
deleted file mode 100644
index a4e3b07..0000000
--- a/qBittorrent/ICEBERG.qbtheme
+++ /dev/null
diff --git a/qBittorrent/ayuDark.qbtheme b/qBittorrent/ayuDark.qbtheme
deleted file mode 100644
index 7570119..0000000
--- a/qBittorrent/ayuDark.qbtheme
+++ /dev/null
diff --git a/vpn b/vpn
deleted file mode 100755
index 7bc5d43..0000000
--- a/vpn
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash
-
-set -e
-
-case $1 in
-
-    up)
-        sudo wg-quick up vpn ;;
-
-    down)
-        sudo wg-quick down vpn ;;
-
-    status)
-        sudo wg ;;
-
-esac
diff --git a/xrec b/xrec
index 867963a..2008c6f 100755
--- a/xrec
+++ b/xrec
@@ -2,18 +2,59 @@
 
 set -e
 
-recordingPATH=~/media/screenrecords/
+recordingPATH="$HOME/media/screenrecords"
+PID_FILE="/tmp/ffmpeg_screenrecord.pid"
+
+mkdir -p "$recordingPATH"
+
+# Detect NVENC support; fallback to fast CPU encoding if no NVIDIA GPU is detected
+if command -v nvidia-smi &> /dev/null && nvidia-smi &> /dev/null; then
+    ENCODER_FLAGS="-c:v h264_nvenc -preset p6 -tune hq -rc constqp -qp 17"
+else
+    ENCODER_FLAGS="-c:v libx264 -preset ultrafast -crf 17" # or medium/slow to be on par with p6 but ehh
+fi
 
 case $1 in
 
     start)
-        dunstify -t 3000 -i /dev/null "  Recording Starts In 3 Seconds"
+        if [ -f "$PID_FILE" ] && kill -0 "$(cat "$PID_FILE")" 2>/dev/null; then
+            dunstify -t 3000 -i /dev/null "⚠️ Recording is already running!"
+            exit 1
+        fi
+
+        dunstify -t 3000 -i /dev/null " Recording Starts In 3 Seconds"
         sleep 3
-        ffmpeg -video_size 1920x1080 -framerate 60 -f x11grab -i :0.0+0,0 -crf 16 ${recordingPATH}screenrecording_$(($(ls $recordingPATH | wc -l)+1)).mp4 ;;
+
+        TIMESTAMP=$(date +'%Y-%m-%d_%H-%M-%S')
+        OUTPUT_FILE="${recordingPATH}/screenrecording_${TIMESTAMP}.mp4"
+
+        # Standard yuv420p conversion allows players to auto-expand blacks properly
+        ffmpeg -video_size 1920x1080 -framerate 60 -f x11grab -i :0.0+0,0 \
+            $ENCODER_FLAGS -profile:v high -pix_fmt yuv420p -movflags +faststart \
+            "$OUTPUT_FILE" >/dev/null 2>&1 &
+
+        echo $! > "$PID_FILE"
+        ;;
 
     stop)
-        pkill ffmpeg
-        dunstify -t 3000 -i /dev/null "  Recording Finished"
+        if [ -f "$PID_FILE" ]; then
+            PID=$(cat "$PID_FILE")
+            if kill -0 "$PID" 2>/dev/null; then
+                kill -SIGINT "$PID"
+                rm -f "$PID_FILE"
+                dunstify -t 3000 -i /dev/null " Recording Finished"
+            else
+                dunstify -t 3000 -i /dev/null "⚠️ Process not running."
+                rm -f "$PID_FILE"
+            fi
+        else
+            dunstify -t 3000 -i /dev/null "⚠️ No active recording."
+        fi
+        ;;
+
+    *)
+        echo "Usage: $0 {start|stop}"
+        exit 1
         ;;
 
 esac
diff --git a/zsh/aliases b/zsh/aliases
index baccb36..a08aea0 100644
--- a/zsh/aliases
+++ b/zsh/aliases
@@ -61,7 +61,6 @@ alias vis='python $scriptdir/vis.py'
 
 # aesthetic
 alias filmelematrix='cmatrix -C red -a'
-#alias colorfetch='neofetch --block_range 0 15'
 alias change-bg='feh --bg-fill --no-fehbg'
 alias clock='tty-clock -Dc -C 4'
 alias sens='watch -n 0.1 sensors'
@@ -77,7 +76,6 @@ alias catgirl="catgirl -h irc.libera.chat -j '#voidlinux'"
 
 # gaming
 alias proton='~/.local/share/Steam/steamapps/common/Proton\ -\ Experimental/proton run'
-alias protonge='~/.local/share/Steam/compatibilitytools.d/GE-Proton10-12/proton run'
 
 # media
 alias mpv='mpv --ytdl-format="bestvideo[ext=mp4]+bestaudio[ext=m4a]"'
@@ -87,7 +85,8 @@ alias ytmp3='yt-dlp --format 'ba' --extract-audio --audio-quality 0 --audio-form
 alias ytmp4='yt-dlp -S res,ext:mp4:m4a --recode mp4'
 
 # envycontrol for nvidia optimus
-envycontrol='/home/alphara/dev/envycontrol/envycontrol.py'
+#envycontrol='/home/alphara/dev/envycontrol/envycontrol.py'
+envycontrol='/home/alphara/dev/envy-new/envycontrol/envycontrol.py'
 alias dedicated='sudo $envycontrol -s nvidia --coolbits 31 --verbose'
 alias dedicated-force='sudo $envycontrol -s nvidia --coolbits 31 --verbose --force-comp'
 alias integrated='sudo $envycontrol -s integrated --verbose'
diff --git a/zsh/env b/zsh/env
index a76825f..0b104cf 100644
--- a/zsh/env
+++ b/zsh/env
@@ -31,7 +31,7 @@ export GOPATH=$HOME/.local/go
 export NO_AT_BRIDGE=1
 
 ### paths ###
-export PATH=/bin:/sbin/:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/home/alphara/.local/bin:/home/alphara/.cargo/bin::/usr/local/go/bin:/home/alphara/.pub-cache/bin:/home/alphara/dev/dotnet:/home/alphara/exfatssd/IEUCYS/flutter/bin:/usr/lib/jvm/openjdk17/bin
+export PATH=/bin:/sbin/:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/home/alphara/.local/bin:/home/alphara/.cargo/bin::/usr/local/go/bin:/home/alphara/.pub-cache/bin:/home/alphara/dev/dotnet:/home/alphara/exfatssd1/IEUCYS/flutter/bin:/usr/lib/jvm/openjdk17/bin
 
 ## for latexocr
 export SCREENSHOT_TOOL=gnome-screenshot
@@ -72,13 +72,13 @@ export GTK_THEME=Arc:dark
 export GTK2_RC_FILES=/usr/share/themes/Arc-Dark/gtk-2.0/gtkrc
 export QT_STYLE_OVERRIDE=kvantum
 
-### pipewire ###
+### pipewire ### not here, but from launching specific programs that are buggy with default latency
 #export PIPEWIRE_LATENCY=256/48000 # 5.3 ms
 # IF NEEDED 128/48000 2.66 ms 64/48000 1.33 ms 32/48000 0.66 ms 16/48000 0.33 ms 8/48000 0.16 ms 4/48000 0.08 ms 2/48000 0.04 ms 1/48000 0.02 ms
 # default aim is 1024/48000 21.33 ms and my system defaults to aim to 4/48000 0.08 ms
 
 ### cuda & ML ###
 export PATH=$PATH:/usr/local/cuda-12.4/bin
-export LD_LIBRARY_PATH=/lib:/usr/lib:/usr/local/lib:/usr/local/cuda-12.4/bin:/usr/lib/qt6/lib
+#export LD_LIBRARY_PATH=/lib:/usr/lib:/usr/local/lib:/usr/local/cuda-12.4/bin:/usr/lib/qt6/lib
 
 TORCH_CUDA_ARCH_LIST="8.6"
diff --git a/zsh/zshrc b/zsh/zshrc
index 7406468..1c6eadc 100644
--- a/zsh/zshrc
+++ b/zsh/zshrc
@@ -86,3 +86,18 @@ if [ -f '/home/alphara/dev/codestorm-mi/google-cloud-sdk/completion.zsh.inc' ];
 export PATH="$PATH:/home/alphara/.lmstudio/bin"
 # End of LM Studio CLI section
 
+source $HOME/.elan/env
+
+# opencode
+export PATH=/home/alphara/.opencode/bin:$PATH
+
+# pnpm
+export PNPM_HOME="/home/alphara/.local/share/pnpm"
+case ":$PATH:" in
+  *":$PNPM_HOME:"*) ;;
+  *) export PATH="$PNPM_HOME:$PATH" ;;
+esac
+# pnpm end
+
+# OpenClaw Completion
+[ -f "/home/alphara/.openclaw/completions/openclaw.zsh" ] && source "/home/alphara/.openclaw/completions/openclaw.zsh"