diff options
Diffstat (limited to 'btop')
| -rw-r--r-- | btop/btop.conf | 132 |
1 files changed, 82 insertions, 50 deletions
diff --git a/btop/btop.conf b/btop/btop.conf index 33779c2..f39326b 100644 --- a/btop/btop.conf +++ b/btop/btop.conf @@ -1,18 +1,23 @@ -#? Config file for btop v. 1.4.4 +#? Config file for btop v.1.4.7 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes. #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes" color_theme = "TTY" #* If the theme set background should be shown, set to False if you want terminal background transparency. -theme_background = False +theme_background = false #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false. -truecolor = True +truecolor = true #* Set to true to force tty mode regardless if a real tty has been detected or not. #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols. -force_tty = False +force_tty = false + +#* Option to disable presets. Either the default preset, custom presets, or all presets. +#* "Off" All presets are enabled. +#* "Default" preset is disabled.#* "Custom" presets are disabled.#* "All" presets are disabled. +disable_presets = "Off" #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets. #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box. @@ -22,10 +27,16 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists. #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift. -vim_keys = False +vim_keys = false + +#* Disable all mouse events. +disable_mouse = false #* Rounded corners on boxes, is ignored if TTY mode is ON. -rounded_corners = True +rounded_corners = true + +#* Use terminal synchronized output sequences to reduce flickering on supported terminals. +terminal_sync = false #* Default symbols to use for graph creation, "braille", "block" or "tty". #* "braille" offers the highest resolution but might not be included in all fonts. @@ -50,47 +61,53 @@ graph_symbol_net = "default" graph_symbol_proc = "default" #* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace. -shown_boxes = "net proc mem cpu gpu0" +shown_boxes = "proc cpu mem net gpu0" #* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs. update_ms = 100 #* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct", #* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly. -proc_sorting = "memory" +proc_sorting = "cpu lazy" #* Reverse sorting order, True or False. -proc_reversed = False +proc_reversed = false #* Show processes as a tree. -proc_tree = False +proc_tree = false #* Use the cpu graph colors in the process list. -proc_colors = True +proc_colors = true #* Use a darkening gradient in the process list. -proc_gradient = True +proc_gradient = true #* If process cpu usage should be of the core it's running on or usage of the total available cpu power. -proc_per_core = False +proc_per_core = false #* Show process memory as bytes instead of percent. -proc_mem_bytes = True +proc_mem_bytes = true #* Show cpu graph for each process. -proc_cpu_graphs = True +proc_cpu_graphs = true #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate) -proc_info_smaps = False +proc_info_smaps = false #* Show proc box on left side of screen instead of right. -proc_left = False +proc_left = false #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop). -proc_filter_kernel = False +proc_filter_kernel = false + +#* Should the process list follow the selected process when detailed view is open. +proc_follow_detailed = true #* In tree-view, always accumulate child process resources in the parent process. -proc_aggregate = False +proc_aggregate = false + +#* Should cpu and memory usage display be preserved for dead processes when paused. +keep_dead_proc_usage = false #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available. #* Select from a list of detected attributes from the options menu. @@ -101,28 +118,31 @@ cpu_graph_upper = "total" cpu_graph_lower = "total" #* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off". -show_gpu_info = "Auto" +show_gpu_info = "On" #* Toggles if the lower CPU graph should be inverted. -cpu_invert_lower = True +cpu_invert_lower = true #* Set to True to completely disable the lower CPU graph. -cpu_single_graph = False +cpu_single_graph = false #* Show cpu box at bottom of screen instead of top. -cpu_bottom = False +cpu_bottom = false #* Shows the system uptime in the CPU box. -show_uptime = True +show_uptime = true + +#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo. +show_cpu_watts = true #* Show cpu temperature. -check_temp = True +check_temp = true #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors. cpu_sensor = "Auto" #* Show temperatures for cpu cores also if check_temp is True and sensors has been found. -show_coretemp = True +show_coretemp = true #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core. #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine. @@ -134,17 +154,20 @@ cpu_core_map = "" temp_scale = "celsius" #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024. -base_10_sizes = False +base_10_sizes = false #* Show CPU frequency. -show_cpu_freq = True +show_cpu_freq = true + +#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average". +freq_mode = "range" #* Draw a clock at top of screen, formatting according to strftime, empty string to disable. #* Special formatting: /host = hostname | /user = username | /uptime = system uptime clock_format = "%X" #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort. -background_update = True +background_update = true #* Custom cpu model name, empty string to disable. custom_cpu_name = "" @@ -154,58 +177,61 @@ custom_cpu_name = "" disks_filter = "" #* Show graphs instead of meters for memory values. -mem_graphs = True +mem_graphs = true #* Show mem box below net box instead of above. -mem_below_net = False +mem_below_net = false #* Count ZFS ARC in cached and available memory. -zfs_arc_cached = True +zfs_arc_cached = true #* If swap memory should be shown in memory box. -show_swap = True +show_swap = true #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk. -swap_disk = True +swap_disk = true #* If mem box should be split to also show disks info. -show_disks = True +show_disks = true #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar. -only_physical = True +only_physical = true #* Read disks list from /etc/fstab. This also disables only_physical. -use_fstab = True +use_fstab = true #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool) -zfs_hide_datasets = False +zfs_hide_datasets = false #* Set to true to show available disk space for privileged users. -disk_free_priv = False +disk_free_priv = false #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view. -show_io_stat = True +show_io_stat = true #* Toggles io mode for disks, showing big graphs for disk read/write speeds. -io_mode = False +io_mode = true #* Set to True to show combined read/write io graphs in io mode. -io_graph_combined = False +io_graph_combined = false #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ". #* Example: "/mnt/media:100 /:20 /boot:1". io_graph_speeds = "" +#* Swap the positions of the upload and download speed graphs. When true, upload will be on top. +swap_upload_download = false + #* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False. net_download = 100 net_upload = 100 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest. -net_auto = True +net_auto = true #* Sync the auto scaling for download and upload to whichever currently has the highest scale. -net_sync = False +net_sync = false #* Starts with the Network Interface specified here. net_iface = "" @@ -214,26 +240,32 @@ net_iface = "" base_10_bitrate = "Auto" #* Show battery stats in top right if battery is present. -show_battery = True +show_battery = true #* Which battery to use if multiple are present. "Auto" for auto detection. selected_battery = "Auto" #* Show power stats of battery next to charge indicator. -show_battery_watts = True +show_battery_watts = true -#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG". +#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG". #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info. log_level = "WARNING" +#* Automatically save current settings to config file on exit. +save_config_on_exit = true + #* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards. -nvml_measure_pcie_speeds = True +nvml_measure_pcie_speeds = true #* Measure PCIe throughput on AMD cards, may impact performance on certain cards. -rsmi_measure_pcie_speeds = True +rsmi_measure_pcie_speeds = true #* Horizontally mirror the GPU graph. -gpu_mirror_graph = True +gpu_mirror_graph = true + +#* Set which GPU vendors to show. Available values are "nvidia amd intel apple" +shown_gpus = "nvidia amd intel" #* Custom gpu0 model name, empty string to disable. custom_gpu_name0 = "" |